“Upside down” interior work.

Click for photo galery

While the hull is still in an upside down position it is a convenient time to make the fillets that supports the horizontal parts like the cabin floor, settees and chart table.

Looking for a material that is able to follow the hull shape and in the same time remains horizontal I found Styrodur insulation foam to be the suitable material. All positions are marked with a laser and the mold is formed by the Styrodur which is supported by temporary pieces of wood. Because of the light weight of the Styrodur it is easy to fix with a 3M spray glue.

Folding strut: to satisfy my curiosity I did a rough alignment check of the folding strut and it seems to be OK (at least at the Port side) A photo is here.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: